Page Comparison

The 45° Normal Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°, thereby slanting the bevel away from the fallout surface, displaying the matboard core from the front.

• The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove.

  • However, it cannot be chosen as a standalone bevel type within the Design Editor.

The Black 45° Blade Cartridge is labeled “45” “45” with a 45° Angle Symbol on the Cartridge end.

The 45° Blade Cartridge does not support Blade Depths above 16.

Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type Dropdown Control to edit this configuration.