Cartridges Involved
This Configuration element involves the following Cartridges.
| Info |
|---|
Note: Not all cartridges are available for all CMC models. |
Interior Backup on the Outsides Definition
| Expand | ||
|---|---|---|
| ||
The Interior Backup controls where the blade plunges into the fallout on interior cuts. |
| Tip |
|---|
|
Current Outside Bevel Type
Select the desired Cartridge Tab.
Select the desired bevel type from the Current Bevel Type dropdown control.
Select Current Bevel Type-Front of Mat if it is being cut from the front of the mat.
| Info |
|---|
The different Bevel Types, including whether it is cutting from the front or the back of the mat, will determine the direction the head travels as it cuts, and dictates whether the corner is a backup or an overcut. |
| Tip |
|---|
|
Outside Interior Backup Too Long
Problem:
The Interior Backup cuts too long.
| Expand | ||
|---|---|---|
| ||
The Interior Backup controls where the blade plunges into the fallout on interior cuts. |
Resolution:
Decrease the Interior Backup.
Outside Interior Backup Too Short
Problem:
The Interior Backup cuts too short.
| Expand | ||
|---|---|---|
| ||
The Interior Backup controls where the blade plunges into the fallout on interior cuts. |
Resolution:
Increase the Interior Backup.
Contents:
|  |