Content Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Image Removed

The Other Cartridge Adjustments

Involve These Cartridges

Other Cartridge Adjustments

InfoThe Other Cartridge Adjustments

section contains additional configuration fields

for V-Grooves and for the non-blade Tool cartridges as described below.

Adjusting the Individual Adjustments

Tip
To adjust, click plus/minus on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.

Image Removed

Select the Cartridge Adjustment to be Edited:

Width Adjustment (V-Groove)

Problem:

The V-Groove width is cut Too Wide or Too Thin.

Resolution:

If the V-Groove is cutting too Thin, Increase the Width Adjustment.
If the V-Groove is cutting too Wide, Decrease the Width Adjustment.
See V-Groove Width Adjustment for more information.

Expand

title	V-Groove Width Adjustment Definition

The V-Groove Width Adjustment controls the Width of the V-Groove Lines.

Image Removed

Outside Rotation (V-Groove)

Problem:

The Outside cut of the Non-Oval V-Groove cuts with Swoopsor Flares.

Resolution:

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.
If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.
See Outside Rotation for additional information.

Expand

title	Outside Rotation on Non-Oval V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.

Expand

title	Outside V-Groove Swoop Definition

A Swoopin the Outside Cut of a Non-Oval V-Groove is where the corners Curve Inward toward the opening on the Outside Cut of the V-Groove.

Expand

title	Outside V-Groove Flare Definition

A Flare in the Outside Cut of a Non-Oval V-Groove is where the corners Curve Away from the opening on the Outside Cut of the V-Groove.

Image Removed

Inside Rotation (V-Groove)

Problem:

The Inside cut of the Non-Oval V-Groove cuts with Swoops or Flares.

Resolution:

If the Inside Non-Oval V-Groove cuts with a Swoop, Increase the Inside Rotation.
If the Inside Non-Oval V-Groove cuts with a Flare, Decrease the Outside Rotation.
See Inside Rotation for additional information.

Expand

title	Inside Rotation on Non-Oval V-Grooves Definition

The Inside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Inside Cut of the Non-Oval V-Grooves.

Expand

title	Inside V-Groove Swoop Definition

A Swoopin the Inside Cut of a Non-Oval V-Groove is where the corners Curve Inward toward the opening on the Inside Cut of the V-Groove.

Expand

title	Inside V-Groove Flare Definition

A Flare in the Inside Cut of a Non-Oval V-Groove is where the corners Curve Away from the opening on the Inside Cut of the V-Groove.

Image Removed

Outside Oval Rotation (V-Groove)

Problem:

The Outside cut of the Oval V-Groove cuts with Feathers or Bumps.

Resolution:

If the Outside Oval V-Groove cuts with a Feather, Increase the Outside Oval Rotation.
If the Outside Oval V-Groove cuts with a Bump, Decrease the Outside Oval Rotation.
See Outside Oval Rotation for additional information.

Expand

title	Outside Oval Rotation for V-Grooves Definition

The Outside Oval Rotation for V-Grooves controls for Feathers or Bumpson the Outside Cut of an Oval V-Groove.

Expand

title	Outside V-Groove Feather Definition

A Feather on the Outside Cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended.

Expand

title	Outside V-Groove Bump Definition

A Bump on the Outside Cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended.

Image Removed

Inside Oval Rotation (V-Groove)

Problem:

The Inside cut of the Oval V-Groove cuts with Feathers or Bumps.

Resolution:

If the Inside Oval V-Groove cuts with a Feather, Decrease the Inside Oval Rotation.
If the Inside Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.
See Inside Oval Rotation for additional information.

ExpandtitleInside Oval Rotation

for V-Grooves

DefinitionThe Inside Oval Rotation for V-Grooves controls for Feathers or Bumpson the Inside Cut of an Oval V-Groove.

Expand

title	Inside V-Groove Feather Definition

A Feather on the Inside Cut of the Oval V-Groove is a Fringe of material left behind where the cut started and ended.

Expand

title	Inside V-Groove Bump Definition

A Bump on the Inside Cut of the Oval V-Groove is a Lump of material left behind where the cut started

and

ended.

Image Removed

Horizontal Adjustment (Tool Specific)

Problem:

The Deboss, Pen or Vinyl Tool Object is applied in the wrong place Horizontally.

Resolution:

If the Tool line is applied too far Left Horizontally, Increase the Horizontal Adjustment.

If the Tool line is applied too far Right Horizontally, Decrease the Horizontal Adjustment.

See Horizontal Adjustment for additional information

for the

Deboss, Pen or Vinyl Tool. Expand

title	Horizontal Adjustment Definition

The Horizontal Adjustment defines the global Horizontal placement of objects applied with the

Non-Blade Tool Cartridges.

Image Removed

Vertical Adjustment (Tool Specific)

Problem:

The Deboss, Pen or Vinyl Tool Objectis applied in the wrong place Vertically.

Problem:

If the Tool line is applied too far Up Vertically, Decrease the Vertical Adjustment.
If the Tool line is applied too far Down Vertically, Increase the Vertical Adjustment.
See Vertical Adjustment for additional information on the Deboss, Pen or Vinyl Tool.

Expand

title	Vertical Adjustment Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

Image Removed

Depth Setting (Tool Specific)

Problem:

The Deboss, Pen or Vinyl Tool is applied at the Wrong Blade Depth.

Resolution:

The Non-Blade Tool is too Deep, Decrease the Depth Setting.
The Non-Blade Tool is too Shallow, Increase the Depth Setting.
Adjust the optimum Depth Setting for the Deboss, Pen or Vinyl Tool.

Expand

title	Depth Setting Definition

The Depth Setting controls the Blade Depth for the Non-Blade Tools in the Configurations.

Image Removed

Corner Pause (ms) (Tool Specific)

Problem:

The Deboss, Pen or Vinyl Tool is tearing the matboard.

Resolution:

The Non-Blade Tool is Tearing in the Corners of the segments, Increase the Corner Pause.
The Non-Blade Tool is Pausing Too Long in the Corners of the segments, Decrease the Corner Pause.
See Corner Pause for the Deboss, Pen or Vinyl Tool.

Expand

title	Corner Pause Definition

The Corner Pause setting in Configurations is the amount of time, in milliseconds, to pause the application of the Non-Blade Tools between segments.

Image Removed

Overshoot (Tool Specific)

Problem:

The Deboss, Pen or Vinyl Tool line is applied too long or too short.

Resolution:

If the Overshoot is applied too Long, Decrease the Overshoot.
If the Overshoot is applied too Short, Increase the Overshoot.
See Overshoot for additional information for the Deboss, Pen or Vinyl Tool.

Expand

title	Overshoot Definition

The Overshoot controls how far past the end of the Line/Arc Segment to apply the Non-Blade Tool (Deboss, Pen or Vinyl).

This is similar to the Overcut used with the Blade cartridges.

Image Removed

Plunge (Tool Specific)

Problem:

The Deboss, Pen or Vinyl Tool line Tears in the corner.

Resolution:

The Non-Blade Tool leaves a Dot where it plunges, select Unplunge.
The Non-Blade Tool takes Too Long to apply, select Plunge.
See Plunge for additional information for the Deboss, Pen or Vinyl Tool.

Expand

title	Plunge Definition

The Plunge function controls whether to Plunge/Unplunge between the Line/Arc Segments of an object when applying a Non-Blade Tool.

Image Removed

Install Pen

Problem:

How to calibrate thePen Tool.

Resolution:

The Install Pen utility is used to calibrate the system for different Pens.

Expand

title	Pen Definition

The Pen Tool allows you to draw on the matboard surface.

Image Removed

Version	Old Version 26	New Version Current
Changes made by	dani.simmonds	dani.simmonds
Saved on	Mar 30, 2023	Feb 20, 2025

Content Comparison

Versions Compared

Key

Cartridges Involved

Other Cartridge Adjustments

Select the Cartridge Adjustment to be Edited:

Problem:

Resolution:

Problem:

Resolution:

Problem:

Resolution:

Problem:

Resolution:

Problem:

Resolution:

Problem:

Resolution:

Problem:

Problem:

Problem:

Resolution:

Problem:

Resolution:

Problem:

Resolution:

Problem:

Resolution:

Problem:

Resolution:

Contents: