Versions Compared

Version Old Version 26 New Version Current
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Image Removed

Exterior Overcut on Creases Definition

Info

  • The Exterior Overcut controls where the cartridge retracts from the matboard on exterior cuts.

  • The Exterior cuts into the matboard, not the fallout.

  • The Exterior Overcut field is marked with a Red Arrow.

Image Removed

Current Crease Bevel Type

Tip

  • Crease

Image Removed
Info

  • The Exterior Overcut is displayed on the Configuration Map and on the associated field as a red arrow.

Image Removed

Crease Exterior Overcut Too Long

Problem:

  • The Exterior Overcut is applied too long.

Resolution:

  • Decrease the Exterior Overcut.

Image Removed
Info

  • To adjust, click plus/minus on the field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Image Removed

Crease Exterior Overcut Too Short

Problem:

  • The Exterior Overcut is applied too short.

Resolution:

  • Increase the Exterior Overcut.

Image Removed
Info

  • To adjust, click plus/minus on the field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Image Removed

Contents:

Child pages (Children Display)
alltrue
depth0
allChildrentrue
style
sortAndReverse
first0
Insert excerpt
Overcut Crease
Overcut Crease
nameOvercut Crease Definition
Image Added