Versions Compared

Old Version 22

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Editing the 45 Degree Blade Cartridge Configurations

Info

  • The 45° metal black blade cartridge* is designed to cut 45° bevels on standard 4-ply matboard.

  • The 45° metal black blade cartridge is labeled 45° on the end. 

Use the Configurationsscreen to adjust how the 45 Degree Cartridge is being cut.info

  • Notes:

    • The 45° blade cartridge does not support blade depths above 16.

    • *Older systems may have a 45° plastic black blade cartridge.

Image Removed

45MetalBevelOpeningCartridge70800.pngImage Added

Image Modified
Image Removed
Image Added
See Image Removed

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
for full instructions on adjusting the Configurations for the 45° Cartridge.

  • .

Expand
titleWhen Cutting From the Front

Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cut Preview.

  • On the Configurations screen the Current Bevel Type dropdown control will display the bevel types in this manner:

    • Cut from the Back bevel type names will be displayed with no further label; i.e., Normal Bevel.

    • Cut from the Front bevel type names will be displayed with a Front label; i.e., Normal Bevel-Front of Mat.

    • V-Grooves have their own selection on the list.

If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat.

So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening.  

Image AddedImage Added
Image Added