| Info |
|---|
|
While the project is cutting, hit the Spacebar on the keyboard.
Don't hit any other key or you will Abort the cut.
The current cut will be paused, allowing you to select to Change the Blade.
Click Change Blade.
Click Continue when done.
The system will continue cutting the mat.
Plunge CountOnToggle: Cut Preview Options | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
The system will pause for a Blade Change after the specified Number of Blade Plunges.
|  | ||||||||||||||||||||||
Setting the Plunge Count Value
| Info |
|---|
|
Go to the Configurations screen.
Select the desired Blade Cartridge tab.
Enter the desired Plunge Count value for that Blade Cartridge in the Plunge Count field.
Click OK.
When the Blade Cartridge hits the selected Number of Blade Plunges while cutting, it will Pause for a Blade Change.
Cutting Paused for Blade Change
| Info |
|---|
|
Cut the mats.
After the number of Plunges entered for this Blade Cartridge, the system will pause and Prompt for a Blade Change.
Click Continue.
It will continue to pause for a Blade change when the number of plunges have been met.
Plunge Count Off
| Info |
|---|
|
Click the Plunge Count toggle Off.
The system will not pause for a Blade Change.
Pausing for Manual Blade Change
Contents:
| |