Versions Compared

Old Version 21

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Measuring Tape Properties

Info

Use the Tape Measure Properties to edit the individual proprietary adjustments available for the Tape Measure.

  • Edit the individual proprietary adjustments available for the Measuring Tape.

    • info

    • Optionally,

     

    • Right-Click

     on

    • on the Measuring Tape

    Measure and select Edit Tape Measure to open the Image Removed

    See: Add New Tape Measure Editor

    See: New Tape Measure Trace

    Image Removed

    Tape Measure Properties

    Tape Measure Points

    Info

    • Point 1 and Point 2 are the two control points of the Tape Measure. 

    • These points are referenced from the bottom-left of the design, which is 0,0.

    Point 1 - Tape Measure

    Point 1 is the Lower Left point of

    • and select Tape Measure Properties.

    Expand
    titleTape Measure Definition
    The Tape Measure utility can be used to measure distances between Objects, Guides, Bordersor to the edge of the Mat.

    Unsnapping the Measuring Tape From the Objects

    • To unsnap the Measuring Tape from an object, click on one of the lines of the Measuring Tape (not the corners) and drag it to the desired position.

    Image Removed

    • Use the Tape Measure Properties to edit the individual proprietary adjustments available for the Tape Measure.

    • X is the Horizontal position.

    • Y is the Vertical position.

    • Edit the fields to move the Tape Measure point.

    Point 2 - Tape Measure 

    Point 2 is the Upper Right point of the Tape Measure. 

    • X is the Horizontal position.

    • Y is the Vertical position.

    • Edit the fields to move the Tape Measure point.

    Image Removed

    Measuring Tape Size

    Tape Measure Sizes

    Info

    • The Width is displayed on the Horizontal line of the Measuring Tape.

    • The Height is displayed on the Vertical line of the Measuring Tape.

    • The Distance is measured between Point 1 and Point 2 and displayed on the Diagonal line

    Image Removed

    Snapping Points of the Measuring Tape

    • Click and drag the Measuring Tape control point to a Control Point of the desired object (side/corner) and let it Snap.

    • Click and drag the other Measuring Tape control point to the next object and let it snap.

    • The Measurements between each of the triangular points are displayed on the Measuring Tape.

    Info

    • The control point of the Measuring Tape will turn red when snapped to another object.

    • The Measuring Tape will remain snapped to the object even if you move or resize the object.

    Image Removed

    Contents:

    Child pages (Children Display)
    alltrue
    depth0
    allChildrentrue
    style
    sortAndReverse
    first0
    		PropertiesTapeMeasure70800.pngImage Added