|   |
| Excerpt | ||||
|---|---|---|---|---|
| ||||
|
...
The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).
...
If the Interior Overcut is cut Too Short, Increase the Interior Overcut.
The Interior Overcut field is marked with a White Arrow on the Configuration screen and the Map illustration.
...
See: Interior Overcut for Drops Configurations
...
| title | Interior Overcut on the Outside Definition |
|---|
...
|
...
The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).
...
|
...
|
...
| Expand | ||
|---|---|---|
| ||
The V-Groove Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove. The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard). If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Overcut on V-Grooves. If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Overcut on V-Grooves. The V-Groove Interior Overcut field is marked with a White Arrow on the Configuration screen and the Map illustration. |
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
...
|
The Interior Overcut field is marked with a White Arrow on the Configuration screen and the Map illustration.
...
See: Interior Overcut for the Outside Configurations
Full Definition: Interior Overcut Definition |