Cartridges Involved
This Configuration element involves the following Cartridges.
| Info |
|---|
Note: Not all cartridges are available for all CMC models. |
52 Degree Cartridge |
|---|
The 52 Degree Cartridge cuts a 52° bevel into the matboard.
Select the 52 Degree Cartridge Bevel Type
Select the 52° Cartridge tab.
Select the desired Bevel Type from the Current Bevel Type dropdown control.
Select the cut type from the list below.
| Expand | ||
|---|---|---|
| ||
The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle. |
52 Degree Opening Configurations
The 52 Degree Opening includes the following bevel types:
| Tip |
|---|
|
52 Degree Drop Configurations
The 52 Degree Drop includes the following bevel types:
| Tip |
|---|
|
52 Degree Outside Configurations
The 52 Degree Outside includes the following bevel types:
| Tip |
|---|
|
52 Degree V-Groove Configurations
The 52 Degree V-Groove includes the following bevel types:
| Tip |
|---|
|
Troubleshooting Button
Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.
| Expand | ||
|---|---|---|
| ||
The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure. |
Contents:
|
| ||||||||||||