Oval Rotation on |
|---|
If you have too much rotation on an oval opening, you will get a Feather, too little and you will get a Bump.
Current Bevel Type
Select the desired Cartridge Type Tab and then the bevel type you want to edit from the Current Bevel Type dropdown control before making adjustments.
Select Current Bevel Type-Front of Mat if it is being cut from the front of the mat.
Degrees of Rotation for Oval Openings
In Oval Rotation, eight points equals one degree of rotation.
Users usually make adjustments 4 points at a time.
Increase the Oval Rotation to turn the foot block clockwise to correct for a Bump.
Decrease the Oval Rotation to turn the foot block counterclockwise to correct for a Feather.
Oval Opening has a Bump
The blade returns to the outside of the starting point of an oval opening, creating a bump in the oval.
Increase the Oval Rotation.
The object will now cut correctly.
When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.
Oval Opening has a Feather
The blade returns to the inside of the starting point of an oval opening, creating a feather in the oval.
Decrease the Oval Rotation.
The object will now cut correctly.
When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.
Circle/Oval Rotation Utility
Optionally, use the Circle/Oval Rotation Utility to fine-tune specific sizes of circles/ovals.
Openings | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Contents:
|   | |||||||||||||||||||||||||||||||||||||||||||||||||||