Page Comparison

Turn off the air.

Turn off the computer. Remove the blade.

Remove the

Head hood (held with Phillips screws w/star washers) to make access to the Head Power Plug easier.

Unplug the

Head power plug by gripping the white plug housing firmly (not the flexible cable), and gently rock it back and forth while pulling up.

Disconnect the air supply.

Disconnect the air line by unscrewing the airline connector.

Open the

Head.

Remove the horizontal bolt from

Head and right hinge on the trolley plate using the 9/64 Allen wrench.

If there is no horizontal bolt, remove small Allen screw to the right of right-hand Hinge.

Gently slide

Head right (rocking up and down may help).

Head should now slide off left hinge pins.

Power off the Driver Pack by flipping the toggle on back to “0”.

Unplug the Board Cable (large grey or black cable) from the back of the Driver Pack by turning black locking ring and pulling gently.

Unplug the power cord.

Unplug the USB Cable from the back of the Driver Pack.

Return the Driver Pack to Wizard.

Bubble-wrap the

Head and the Driver Pack and put it in the box.

Bubble-wrap the parts.

Fill the rest of the box with bubble-wrap/packaging peanuts.

Ship the box back to Wizard.

Please use the return labels that have been provided. Give the packages to your regular Fed-Ex delivery pickup.

If you do not have regular Fed-Ex delivery, call 1-800-GOFEDEX (1-800-463-3339) to arrange pickup.

If you have any questions, please contactChristina.Costilla@wizardcutters.com 425-551-4300 x4304.