Content Comparison

Selecting the Default Setting to Use the

Default Settings:

See Admin > Cutting for the default settings for Cutting from the Front or the Back

See Admin > Cutting for the default settings for Cutting With the 45° Front Cartridge or with the Normal 45° Cartridge when cutting from the front of the mat.

Info
The 45° Front Blade Cartridge cuts the bevel angle on the matboard at 45° from the Front of the mat. The 45° Front Blade Cartridge

Info
Set the 45° Front default settings for the 45 Degree Front Blade Cartridge. is not selected within the Editor; it is set by setting Cut From Front on the Cut Preview.

Insert excerpt

Tip

Select Change to 45° Front Blade to default to using the 45° Front Blade Cartridge when cutting a design from the front of the mat.
Click Save.
It will now use the 45° Front Blade Cartridge when you are cutting from the front.

Default Settings
Cut from Front: Cutting Default Setting Cut From Front Blade Cartridge Selection: Cutting Default Setting

Versions Compared