Cartridges Involved
This Configuration element involves the following Cartridges.
| Info |
|---|
Note: Not all cartridges are available for all CMC models. |
Tool Configs Section | ||
|---|---|---|
| ||
Plunge Count
Problem:
The opening/object does not pause for a blade change while cutting.
Resolution:
Adjust the Plunge Count in the Configuration Screen.
Toggle the Plunge Count to On in the Cut Preview.
See Plunge Count for additional information.
| Expand | ||
|---|---|---|
| ||
The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change. |
Circle/Oval Rotation Button
Problem:
The Circle/Oval has a Feather/Bump.
Resolution:
If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.
See Circle/Oval Rotation Utility for additional information.
See Oval Rotation for additional information.
| Expand | ||
|---|---|---|
| ||
A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended. |
| Expand | ||
|---|---|---|
| ||
A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended. |
|
Horizontal
Problem:
The opening/object is cut in the wrong place Horizontally.
Resolution:
If the Opening is cut too far Left Horizontally, Increase the Horizontal Home.
If the Opening is cut too far Right Horizontally, Decrease the Horizontal Home.
See Horizontal Home for additional information.
| Expand | ||
|---|---|---|
| ||
The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges. |
Vertical
Problem:
The opening/object is cut in the wrong place Vertically.
Resolution:
If the Opening is cut too far Up Vertically, Decrease the Vertical Home.
If the Opening is cut too far Down Vertically, Increase the Vertical Home.
See Vertical Home for additional information.
| Expand | ||
|---|---|---|
| ||
The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges. |
Depth Bias
Problem:
The opening/object is cut at the wrong depth when a SKU has been selected.
Resolution:
The Blade Depth is too Deep, Decrease the Depth Bias.
The Blade Depth is too Shallow, Increase the Depth Bias.
See Depth Bias for additional information.
| title | Depth Bias Definition |
|---|
Contents:
|  |