Cartridges Involved
This Configuration element involves the following Cartridges.
| Info |
|---|
Note: Not all cartridges are available for all CMC models. |
52 Degree Cartridge |
|---|
The 52 Degree Cartridge cuts a 52° bevel into the matboard.
Select the 52 Degree Cartridge Bevel Type
Select the 52° Cartridge tab.
Select the desired Bevel Type from the Current Bevel Type dropdown control.
Select the cut type from the list below.
52 Degree Opening Configurations
Select this topic to see information on editing the configurations for the 52 Degree Opening, including:
| Tip |
|---|
|
52 Degree Drop Configurations
Select this topic to see information on editing the configurations for the 52 Degree Drop, including:
| Tip |
|---|
|
52 Degree Outside Configurations
Select this topic to see information on editing the configurations for the 52 Degree Outside, including:
| Tip |
|---|
|
52 Degree V-Groove Configurations
Select this topic to see information on editing the configurations for the 52 Degree V-Groove.
| Tip |
|---|
|
Troubleshooting Button
Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.
Contents:
|
| ||||||||||||