Versions Compared

Old Version 15

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
#B3F5FF

Curve Design Details

  • Click on a Curve to see the specific details about it.

Expand
titleIf the Arc Displays as Curve/Spline

If you bring in the design from Designer, Offset the Arc and select the offset, or Convert Arcs to Splines, then clicking on the "Arc" will display Curve/Spline information. 

Expand
titleOffset Definition

The Offset button creates a displacement copy of the selected object a parallel distance away as specified in the Offset Reveal field in Trace.

Expand
titleArcs Definition

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

Expand
titleCurve Tool Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

Image Removed
Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor
Insert excerpt
Curve Tool Definition
Curve Tool Definition
nameCurve Tool Definition
Image Added
Info

  • The Curve Design Details section displays information about the selected Curve.

Expand
titleCurve Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

Image RemovedImage Added
#B3F5FF

  • Displays the Start X/Y Coordinates of the Curve’s start point when drawn.

    • If you clicked on the upper left and drew by dragging to the lower right, that would make the start point in the upper left corner. 

title

Design Curve Details

Start X and Y 

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor
Expand
Insert excerpt
X and Y Position
Definition 
The
X
Positionfield is used to set or display the Horizontal position of the selected object in Designer, Trace
and
the Cut Preview.  Expandtitle
Y Position
Definition
name

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Expand
titleCurve Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

Image Removed
X and Y Position Definition
Image Added

Mid X1 and Y1 

PanelpanelIconIdatlassian-infopanelIcon

::#B3F5FF
Info
bgColor

  • Displays the first Mid Point X1 and Y1 Coordinates.

Expand
titleX Position Definition

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

Expand
titleY Position Definition

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Image RemovedImage Added

Mid X2 and Y2 

PanelpanelIconIdatlassian-infopanelIcon

::#B3F5FF
Info
bgColor

  • Displays the second Mid Point X2 and Y2 Coordinates.

Expand
titleX Position Definition

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

Expand
titleY Position Definition

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Image RemovedImage Added

End X and Y 

PanelpanelIconIdatlassian-infopanelIcon

::#B3F5FF
Info
bgColor

  • Displays the End Points X and Y Coordinates.

Expand
titleX Position Definition

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

Expand
titleY Position Definition

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Image RemovedImage Added

Bevel Type 

PanelpanelIconIdatlassian-infopanelIcon

::#B3F5FFexpand
Info
bgColor
Insert excerpt
title

Layer 

PanelpanelIconIdatlassian-infopanelIcon:info:bgColor#B3F5FF
Traced
Bevel Type Definition

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Expand
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Removed
Traced
nameTraced Definition
Image Added

Layer 

expand
Info

  • Displays the Layer this object is assigned to if the object is Traced.

Image Added
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Removed