Versions Compared

Old Version 15

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Editing the 45 Degree Blade Cartridge Configurations

Configurations

Select this topic for more information about the Configurationsscreen where you can adjust how the CMC is cutting with the bladed cartridges or applying the non-bladed cartridges.Image Removed

  • The 45 Degree Cartridge cuts a 45° bevel into the matboard.   

Image Removed
Info

  • The 45° metal black blade cartridge* is designed to cut 45° bevels on standard 4-ply matboard.

  • The 45° metal black blade cartridge is labeled 45° on the end. 

  • Notes:

    • The 45° blade cartridge does not support blade depths above 16.

    • *Older systems may have a 45° plastic black blade cartridge.

45MetalBevelOpeningCartridge70800.pngImage Added

Image Added
Image RemovedImage Removed
Image Added

  • Select this topic to see information on Editing the 45 Degree Configurations.

    • Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6
    Expand
    titleWhen Cutting From the Front

    Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cut Preview.

    • On the Configurations screen the Current Bevel Type dropdown control will display the bevel types in this manner:

      • Cut from the Back bevel type names will be displayed with no further label; i.e., Normal Bevel.

      • Cut from the Front bevel type names will be displayed with a Front label; i.e., Normal Bevel-Front of Mat.

      • V-Grooves have their own selection on the list.

    If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat.

    So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening.  

    Image AddedImage Added
    		Image Added