Versions Compared

Old Version 14

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Outside Rotation on V-Grooves Definition

A Swoop in a Non-Oval
Panel
panelIconIdatlassian-plus
panelIcon:plus:
panelIconText:plus:
bgColor#FFFAE6

The Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the outside cut of the Non-Oval V-Grooves.

Swoop on the Outside Cut of the Non-Oval V-Groove

  • A Swoop on the Outside cut of the V-Groove is where the corners Curve Inward toward the opening.

    • If the Outside cut of the V-Groove cuts with a Swoop, Decrease the Outside Rotation.

Expand
titleSwoop in the Outside Cut of a V-Groove Full Definition

A Swoop on the Outside Cut of the V-Groove is where the corners

curve inward

Curve Inward toward the opening.

If the Outside

Non-Oval

cut of the V-Groove cuts with a Swoop, Decrease the Outside Rotation.

The Outside Rotation on V-Grooves controls for Swoops and Flares in the Outside cut of the V-Grooves.

Image AddedImage Added

See: Outside Rotation on V-Grooves Configurations

Panel
panelIconIdatlassian-plus
panelIcon:plus:
panelIconText:plus:
bgColor#FFFAE6

  • A Flare on the Outside

Cut

  • cut of the

Non-Oval

  • V-Groove is where the corners Curve Away from the opening.

    • If the Outside cut of the V-Groove

A Flare in a Non-Oval
Expand
titleFlare in the Outside Cut of a V-Groove Full Definition

A Flare on the Outside Cut of the V-Groove is where the corners

curve away

Curve Away from the opening.

If the Outside

Non-Oval

cut of the V-Groove cuts with a Flare, Increase the Outside Rotation.

The Outside Rotation on V-Grooves controls for Swoops and Flares in the Outside cut of the V-Grooves.

Image AddedImage Added

See: Outside Rotation

.Image Removed

on V-Grooves Configurations

Expand
titleHow to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image AddedImage Added