Versions Compared

Old Version 13

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cut the Full Outside Edge: Cut Preview Outside Cut Options

  • Select Full from the Outside Cut Options dropdown control to cut the complete outside edge of the design on the CMC Z1

and

  • , Z(9000z), 9000 and 8000+.

  • When Tiling mats, it will cut out the complete outside edge of each design.

  • If you have Remnant Trimming on, it will also cut off the scrap edge.

Expandtitle

    • Remnant Trimming

DefinitionRemnant Trimming

    • feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

Image Modified

Advanced Outside Options

Image Removed
Image Removed

  • The full Outside edge of the design or Tiled designs will be cut. 

  • If you have Remnant Trimming on, it will also cut off the scrap edge.

Expand
titleRemnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

Image Removed

Defaults: Set the Default for Cutting the Outside 

Expand
titleDefault Setting for Cutting the Outside

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Image Removed

Defaults: Set the Default for 90 Degree Outside Cut

Expand
titleDefault Setting for the 90 Degree Outside Cut

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Image Removed

Defaults: Set the Default for the Advanced Options

Expand
titleDefault Setting for the Default Advanced Options

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Image Removed

Defaults: Set the Default for the Cut Mode

Expand
titleDefault Setting for the Cut Mode

The default setting for the Cut Mode can be set in the Admin > Cutting section.

Image Removed

Default Settings