Page Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Image Removed

• The first cut is the interior V-Groove line.

• The second cut is the exterior V-Groove line.

Image Removed

Problem: V-Groove Outside has a Swoop

Problem:

The beginning of the outside cut of the V-Groove Swoops toward the non-oval V-Groove opening.

Image Removed

Resolution:

• Decrease the Outside Rotation.

• When making adjustments, click the minus button (-) at the end of the desired field about five or six times.

• Click OK and do a test cut.

• Check the results of the cut and continue making adjustments until the desired outcome is achieved.

Image Removed

• The object will now cut correctly.

Image Removed

Problem: V-Groove Outside has a Flare

Problem:

The beginning of the outside cut of the V-Groove Flares away from the non-oval V-Groove opening.  

Image Removed

Resolution:

• Increase the Outside Rotation value. 

• When making adjustments, click the plus button (+) at the end of the desired field about five or six times.

• Click OK and do a test cut.

• Check the results of the cut and continue making adjustments until the desired outcome is achieved.

Image Removed

• The object will now cut correctly.

Image Removed

See Also: V-Groove Inside Rotation

• Select this topic to see information on the Inside Rotation (V-Groove) to adjust the rotation for the inside cut of the non-oval V-Groove.

Image Removed

. If V-Groove Outside has a Flare, Increase the Outside Rotation. Insert excerpt How to Adjust the Configurations How to Adjust the Configurations name How to Adjust Configurations nopanel true Insert excerpt Swoop on V-Groove Swoop on V-Groove name Swoop on V-Groove Definition Insert excerpt Flare on V-Groove Flare on V-Groove name Flare on V-Groove Definition Panel panelIconId 1f9d9-200d-2642-fe0f panelIcon :man_mage: panelIconText 🧙‍♂️ bgColor #FFFAE6 For Additional Information: V-Groove Outside Cut has a Swoop V-Groove Outside Cut has a Flare Troubleshooting Utility for the Configurations

Image AddedImage AddedImage Added