| Panel |
|---|
| panelIconId | atlassian-plus1f9d9-200d-2640-fe0f |
|---|
| panelIcon | :pluswoman_mage: |
|---|
| panelIconText | :plus:🧙♀️ |
|---|
| bgColor | #FFFAE6 |
|---|
| | title | 45° Reverse Bevel Opening Full DefinitionThe 45° Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°, thereby slanting the bevel under the matboard surface. The matboard core is not visible from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position.
|
|---|
| Expand |
|---|
|
|  Image Added |
...
| Excerpt |
|---|
| hidden | true |
|---|
| name | 45 Degree Reverse Bevel Opening |
|---|
|
The 45° Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°, thereby slanting the bevel under the matboard surface. The matboard core is not visible from the front.
|
The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.
The Bevel Type determines the initial blade plunge position.
Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.
...
| Expand |
|---|
| title | How to Adjust the Configurations |
|---|
|
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Image Removed