Measuring Tape Properties |
|---|
|
Edit the individual proprietary adjustments available for the Measuring Tape.
|
|
|
|
|
Tape Measure Points
Point 1 and Point 2 are the two control points of the Tape Measure.
These points are referenced from the bottom-left of the design, which is 0,0.
Point 1 - Tape Measure
Point 1 is the lower left point of| Info |
|---|
|
Unsnapping the Measuring Tape From the Objects
To unsnap the Measuring Tape from an object, click on one of the lines of the Measuring Tape (not the corners) and drag it to the desired position.
|
X is the horizontal position.
Y is the vertical position.
Edit the fields to move the Tape Measure point.
Point 2 - Tape Measure
Point 2 is the upper right point of the Tape Measure.
X is the horizontal position.
Y is the vertical position.
Edit the fields to move the Tape Measure point.
Measuring Tape Size
Tape Measure Sizes
The Width is displayed on the horizontal line of the Measuring Tape.
The Height is displayed on the vertical line of the Measuring Tape.
The Distance is measured between Point 1 and Point 2 and displayed on the diagonal line
Snapping Points of the Measuring Tape
Click and drag the Measuring Tape control point to a control point of the desired object and let it snap to the side/corner.
Click and drag the other Measuring Tape control point to the next object and let it snap.
The measurements between each of the triangular points are displayed on the Measuring Tape.
Contents:
|  |