...
Below is a list of the most common feature buttons in Trace
...
Trace the Design
...
Load
Load From Database
...
Save
Save to Database
Save CutArt
Save Path
Save DXF
Save SVG
Send to CMC
...
Trace and Draw Buttons
...
Draw
Line
Arc
Curve
Oval
Poly
Star
...
Edit
Mirror
Join
Close
Merge
Break
Explode
Flip
Offset
Rotate
Tangify
Move an Object
Move a Point
...
Tool Buttons
Cut Current Design
Explode All
New Tape Measure
Delete
Undo
Auto Join Segments
View from Front/Back
Dynamic Outsides
Design Bounds
...
Zoom Buttons
Zoom to Window
Zoom In
Zoom Out
Zoom All
...
Set Bevels Buttons
Trace the Design
Bevels and Cartridge Type Selections
Layers
Add/Remove Layers
...
Order Cut Buttons
Cut Earlier
Cut Later
Change Start
Traced Object Type
Opening
V-Groove
Pen
Deboss
Vinyl
Crease
Set Optimized Cut Order
Vectorize Buttons
...
Take Picture
...
Load File Image
...
Load Server Image
...
Image Sensitivity Settings
Opacity
Turn Policy
Ignore Area
Tolerance
Angle Limit
Threshold
Optimize
...
Set to Defaults
...
Clear Partial Image Bounds
...
| View file | ||
|---|---|---|
|
Trace Lessons: Gaining Familiarity | |
|---|---|
The following lessons will help gain familiarity as you walk through the different functions of Trace. |  |
It is suggested that as you work, save the design as a Path. This will allow you to save the design as you go without being required to trace the design. If you are interrupted, you can save the design and reload the Path file into Trace at a later time and continue on with the lesson. Many of these lessons start with objects created in Design. See the Design Editor for more information on placing and aligning objects, etc. |  |
Trace Lesson One: Adjust an Object Freehand Select this topic to see information on Adjusting an Object Freehand. |  |
Trace Lesson Two: Alter a Template Select this topic to see information on Altering a Template. |  |
Trace Lesson Three: Camel V-Groove/Deboss/Pen Select this topic to see information on creating a Camel V-Groove/Deboss/Pen. |  |
Trace Lesson Four: Name Plate V-Groove Select this topic to see information on creating a Name Plate V-Groove. |  |
Trace Lesson Five: Free-Floating V-Groove Select this topic to see information on creating a Free-Floating V-Groove. |  |
Trace Lesson Six: CutArt on a Different Layer Select this topic to see information on creating a CutArt on a Different Layer. |  |
Trace Lesson Seven: Stained Glass Window Select this topic to see information on creating a Stained Glass Window. |  |
Trace Lesson Eight: Fancy Corners Select this topic to see information on creating a Fancy Corners mat. |  |
Select this topic to see information on creating a Doily. |  |
Trace Lesson Ten: Merging Objects to Make a Jersey Select this topic to see information on Merging Objects to Make a Jersey. |  |
Trace Lesson Eleven: Starburst Select this topic to see information on creating a Starburst. |  |
Trace Lesson Twelve: Load an Image to Draw Over Select this topic to see information on Loading an Image to Draw Over. |  |
Trace Lesson Thirteen: Load an Image to Vectorize Select this topic to see information on Loading an Image to Vectorize. | |