Page Comparison

V-Groove Inside Cut has a Flare

If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.

Insert excerpt

	How to Adjust the Configurations
	How to Adjust the Configurations
name	How to Adjust Configurations
nopanel	true

Insert excerpt

Image Removed

A Flare on the Inside cut of the V-Groove is where the corners Curve Away from the V-Groove.

If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.

The Rotation on V-Grooves controls for Swoopsor Flareson V-Grooves.

Image Removed

Panel

For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval V-Groove.

Expand

title	Inside V-Groove Flare Definition

Expand

title	How to Adjust the Inside or Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Added