Page Comparison

Adjust the Rotation if you are getting swoops or flares in the corners where the blade plunges in and where it retracts from the matboard on a non-oval V-Groove which is controlled by Rotation.

V-Groove Outside Rotation

The Outside Rotation field controls how much the foot block will rotate before cutting. 

The outside cuts of the V-Groove are exterior cuts, and cut into the matboard and not the V-Groove fallout. They cut on the second pass of the V-Groove, and are cut in a counterclockwise direction.

See V-Groove Outside

Rotation for information on how to adjust for this.

V-Groove Inside Rotation

The Inside Rotation field controls how much the foot block will rotate before cutting. 

The inside cuts of the V-Groove are interior cuts, and cut into the V-Groove fallout and not the matboard. They cut on the first pass of the V-Groove, and are cut in a clockwise direction.

See V-Groove Inside

Rotation for information on how to adjust for this.

The Rotationfield controls how much the foot block will rotate before cutting. Adjust the Rotationif you are getting Swoopsor Flaresin the corners on a non-oval V-Groove.