Page Comparison

This is viewed from the front of the mat. If the Exterior Overcuts retracts the blade too late, it makes the exterior overcut too long.

Decrease the Exterior Overcut.

The corners will now correctly connectmeet up properly.

When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.

This is viewed from the front of the mat. If the Exterior Overcuts retracts the blade too soon, it makes the exterior overcut too short.

Increase the Exterior Overcut.

The corners will now correctly connectmeet up properly.

When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.