Versions Compared

Old Version 24

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 25

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

White Arrow on the Configuration Map

The Interior Overcut is displayed on the Configuration Map as a white arrow.

Check against the Configuration Map of the Bevel Type you are cutting to determine specifically which cuts are the Interior Overcuts.

Interior Cuts, such as on French Stairs, cut into the fallout of the opening, not the matboard. 

Drop Interior Overcut Too

Short

Long

This is viewed from the front of the mat. If the Interior Overcuts retracts Overcuts retracts the blade too soonlate, it makes the interior overcut too shortlong.

Image RemovedIncrease the Interior Image Added

Decrease the Interior Overcut. 

When making adjustments, click the plus or minus button at the end of the desired field about five times. Click OK and do another test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.

Drop Interior Overcut Too

Long

Short

This is viewed from the front of the mat. If the Interior Overcuts retracts Overcuts retracts the blade too latesoon, it makes the interior overcut too longshort.

Image RemovedDecrease the Interior Image Added

Increase the Interior Overcut. 

When making adjustments, click the plus or minus button at the end of the desired field about five times. Click OK and do another test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.

...