...
Red Arrow on the Configuration Map | |
|---|---|
The V-Groove Exterior Overcut, which is part of the outside cut of the V-Groove, is displayed on the V-Groove Configuration Map as a red arrow. |   |
Check against the Configuration Map of the V-Groove you are cutting to determine specifically which cuts are the Exterior Overcuts. |   |
Exterior Cuts, such as rectangles, cut into the matboard, not the fallout of the V-Groove. |  |
V-Groove Cut Direction and Cut Order | |
|---|---|
The inside of the V-Groove cuts first in a clockwise direction. These are internal cuts, which cut into the V-Groove fallout. The outside of the V-Groove cuts second in a counter-clockwise direction. These are external cuts, which cut into the matboard. The Exterior Overcut is part of the second pass. |  |
...