Page Comparison

A Bump forms when the blade returns to the outside of the starting point because the Oval Rotation is too low. Increase the Oval Rotation.

A Bump displays on the circle where the blade returns to the outside of the starting point.

Select the desired oval size listing and increase the Oval Rotation value by moving the slidebar of the oval size to the right.

This is like increasing the Oval Rotation field on the Configurations screen,but is specific to this particular oval size.

Do another test cut. Keep making adjustments until the ovals cut out as expected.

A Feather forms when the blade returns to the inside of the starting point because the Oval Rotation is too high. Decrease the Oval Rotation.

A Feather displays on the circle where the blade returns to the inside of the starting point.

Select the desired oval size listing and decrease the Oval Rotation value by moving the slidebar of the oval size to the left.

This is like decreasing the Oval Rotation field on the Configurations screen,but is specific to this particular oval size.

Do another test cut. Keep making adjustments until the ovals cut out as expected.