...
Black Arrow on the Configuration Map | |
|---|---|
The Interior Backup is displayed on the Configuration Map as a black arrow. |  |
Check against the Configuration Map of the Bevel Type you are cutting to determine specifically which cuts are the Interior Backups. |   |
Interior Cuts, such as on French Stairs, cut into the fallout of the opening, not the matboard. |  |
Opening Interior Backup Too Short | |
|---|---|
If the Interior Backup plunges the blade too late, it makes the interior backup too short. |   |
Increase the Interior Backup. |   |
When making adjustments, click the plus or minus button at the end of the desired field about five times. Click OK and do another test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved. |  |
Opening Interior Backup Too Long | |
|---|---|
If the Interior Backup plunges the blade too soon, it makes the interior backup too long. |   |
Decrease the Interior Backup. | |
When making adjustments, click the plus or minus button at the end of the desired field about five times. Click OK and do another test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved. | |
Opening Exterior Backups | |
|---|---|
For Backups where the blade plunges into the matboard instead of the fallout, see Exterior Backup. |   |