Page Comparison

The screen indicator will display if you are cutting from the back or the front of the mat.

Place the matboard on the CMC with the front of the mat facing the board when cutting from the back and with the front of the mat facing the user when cutting from the front. 

See: Placing Matboard when Cutting from the Back for more information.

See: Placing Matboard when Cutting from the Front for more information.

Check for Clamp Interference on the CMC Z1 and Z (9000z), and adjust the finger-clamps accordingly.

See: Clamp Interference CMC Z1 and Z (9000z).

Click the Cut button on the Cutting Preview Screen.

See: Cut Button.

If the motors on the CMC are disengaged, the user will be prompted to Align the Head. 

• Click here for instructions on Aligning See: Align the Head on the CMC Z1. Click here for instructions on Aligning

• See: Align the Head on the CMC Z (9000z). Click here for instructions on

• Aligning See: Align the Head on the CMC 9000. Click here for instructions on Aligning

• See: Align the Headon the CMC 8000. 

Change the Blade Cartridge and Blade Depth as prompted, and click OK. 

See: Changing the Blade Cartridge.

See: Changing the Blade Depth.

After the Head is Aligned, the desired Blade Cartridge inserted and the Blade Depth adjusted as prompted, the CMC will begin to cut.