Page Comparison

The screen indicator will display if you are cutting from the back or the front of the mat.

Place the matboard on the CMC with the front of the mat facing the board when cutting from the back and with the front of the mat facing the user when cutting from the front. 

Check for Clamp Interference on the CMC 9000z and Z1Z1 and Z (9000z), and adjust the finger-clamps accordingly.

Click the Cut button on the Cutting Preview screenScreen.

If the motors on the CMC are disengaged, the user will be prompted to Align the Head. 

• Click here for instructions on Aligning the Head on the CMC 8000Z1. 

• Click here for instructions on Aligning the Head on the CMC 9000Z (9000z). 

• Click here for instructions on Aligning the Head on the CMC 9000z9000. 

• Click here for instructions on Aligning the Headon the CMC Z18000. 

Change the Blade Cartridge and Blade Depth as prompted, and click OK. 

After the Head is Aligned, the desired Blade Cartridge inserted and the Blade Depth adjusted as prompted, the CMC will begin to cut.