Page Comparison

Versions Compared

Key

This line was added.
This line was removed.
Formatting was changed.

52 Degree V-Groove
The 52 Degree Cartridge cuts the V-Groove with a 52° bevel.	Image RemovedImage Added

Select the 52 Degree V-Groove Bevel Type

Select the 52° Tab on the Configurations screen.

Select V-Groove from the Current Bevel Type dropdown control.

Image Removed

Image Added

Select the Area of Concern for V-Grooves Below:

V-Groove Cuts in the Wrong Place Horizontally
Select this topic to adjust the Horizontal Home.	Image RemovedImage Added

V-Groove Cuts in the Wrong Place Vertically
Select this topic to adjust the Vertical Home.	Image RemovedImage Added

Blade Depth is Incorrect When Using a SKU
Select this topic to adjust the Depth Bias.	Image RemovedImage Added

Does Not Pause for Blade Change
Select this topic to adjust the Plunge Count.	Image RemovedImage Added

Circle/Oval Rotation Button Utility
Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.	Image RemovedImage Added

Exterior Backup is too Long
Select this topic to adjust the Exterior Backup.	Image RemovedImage Added

Exterior Backup is too Short
Select this topic to adjust the Exterior Backup.	Image RemovedImage Added

Exterior Overcut is too Long
Select this topic to adjust the Exterior Overcut.	Image RemovedImage Added

Exterior Overcut is too Short
Select this topic to adjust the Exterior Overcut.	Image RemovedImage Added

Interior Backup is too Long
Select this topic to adjust the Interior Backup.	Image RemovedImage Added

Interior Backup is too Short
Select this topic to adjust the Interior Backup.	Image RemovedImage Added

Interior Overcut is too Long
Select this topic to adjust the Interior Overcut.	Image RemovedImage Added

Interior Overcut is too Short
Select this topic to adjust the Interior Overcut.	Image RemovedImage Added

V-Groove Cuts the Wrong Size
Select this topic to adjust the Opening Adjustment.	Image RemovedImage Added

V-Groove Cuts too Thin
Select this topic to adjust the Width Adjustment.	Image RemovedImage Added

V-Groove Cuts too Thick
Select this topic to adjust the Width Adjustment.	Image RemovedImage Added

V-Groove has an Outside Swoop
Select this topic to adjust the Outside Rotation.	Image RemovedImage Added

V-Groove has an Outside Flare
Select this topic to adjust the Outside Rotation.	Image RemovedImage Added

V-Groove has an Inside Swoop
Select this topic to adjust the Inside Rotation.	Image RemovedImage Added

V-Groove has an Inside Flare
Select this topic to adjust the Inside Rotation.	Image RemovedImage Added

Oval V-Groove has an Outside Bump
Select this topic to adjust the Outside Oval Rotation.	Image RemovedImage Added

Oval V-Groove has an Outside Feather
Select this topic to adjust the Outside Oval Rotation.	Image RemovedImage Added

Oval V-Groove has an Inside Bump
Select this topic to adjust the Inside Oval Rotation.	Image RemovedImage Added

Oval V-Groove has an Inside Feather
Select this topic to adjust the Inside Oval Rotation.	Image RemovedImage Added

Troubleshooting Button
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.	Image RemovedImage Added