Page Comparison

The default setting for the Border Order Defaults can be set in the Admin > Defaults section.

If you are entering the Opening size first, the program automatically calculates the Outside size when tabbing out of the Borders field.  

If you are entering the Outside dimension first, the program automatically calculates the Opening size when tabbing out of the Borders field. 

Width

Enter the outside Width dimension. 

Height

Enter the outside Height dimension.

Sizes Button

The Sizes button displays a list of Recent and Standard sizes. 

Swap Button

The Swap button switches the values between the width and height fields. 

The default setting for the Outside Size First can be set in the Admin > Defaults section.

Select the desired template and its properties.

Select Template

Click on the template thumbnail under template design.

The Template Library opens. 

Note there are several pages of templates. Click on one of the numbered tabs or scroll through the list to see the other templates. 

Click on the desired template thumbnail to select it.

The new template is displayed. 

Enter the number of Layers, the reveal value for each layer. 

Select the Reverse Bevel checkbox or the RB? button to make the layer(s) reverse bevel if desired.

Set the default setting for the number of layers in the Admin > Editor section.

Set the default Reveal Value in the Admin > Defaults section.

Click on the Cartridge Icon. 

Select the desired cartridge for this layer.  

Note that not all cartridges are available in all scenarios. 

For instance, you cannot select the Deboss Cartridge for a template from the New Openings Screen. You would need to take the design into the Editor, create a Deboss opening, then select a template shape for it on the Properties Tab.