Versions Compared

Version Old Version 3 New Version 4
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel
panelIconIdatlassian-plus
panelIcon:plus:
panelIconText:plus:
bgColor#FFFAE6

  • Some cartridges are available only available in specific circumstances.

  • The 45°+ Cartridge is not selectable from the New Opening Screen or the Properties Tab on the Design screen.

    • The 45°+ Cartridge is selected on the Cut Preview Screen by selecting a Blade Depth above 16.

  • The 45° Front Cartridge is not selectable from the New Opening Screen or the Properties Tab on the Design screen.

    • The 45° Front Cartridge is selected on the Cut Preview Screen by selecting Options > Cut From Front Tool > Switch Between Front and Normal Tools and selecting to Cut From the Front of the mat.

  • The Non-Blade Cartridges (Deboss/Pen/Vinyl/Crease) are not selectable from the New Opening Screen or the Properties Tab on the Design screen for Templates.

    • You must first place the Non-Blade Cartridge object (Deboss/Pen/Vinyl/Crease) from the Openings Tab > Add Decorative Line then go to Properties Tab > Options to select the Template shape.

45PlusMetalBevelOpeningCartridge70800.pngImage Removed45FrontMetalBevelOpeningCartridge70800.pngImage RemovedDebossingPenCartridgesVinyl70800.pngImage Removed45PlusMetalBevelOpeningCartridge70800.pngImage Added45FrontMetalBevelOpeningCartridge70800.pngImage AddedDebossingPenCartridgesVinyl70800.pngImage Added