Versions Compared

Old Version 3

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 4

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

  • For Additional Information: 

  • See Options > Switch Between Front and Normal Tools on the Cut Preview.

    • See Options > Always use Normal Tool on the Cut Previewto toggle on/off this feature. See Options > Cut From Front on the Cut Previewto cut the design from the Front of the mat.See Options > Cut Front Tool on the Cut Previewto designate which cartridge to use when cutting from the front of the mat.

  • Select Cut From Front toggle on the Cut Preview.

    • Cut From Front Blade Cartridge Selection: Cutting Default Setting

    Info

    • Select which Blade Cartridge Selection to use as default when cutting from the Front.

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6
    Tip
    Expand
    titleCut From Front Definition

    Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cut Preview.

    • On the Configurations screen the Current Bevel Type dropdown control will display the bevel types in this manner:

      • Cut from the Back bevel type names will be displayed with no further label; i.e., Normal Bevel.

      • Cut from the Front bevel type names will be displayed with a Front label; i.e., Normal Bevel-Front of Mat.

      • V-Grooves have their own selection on the list.

    If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat.

    So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening.   

    Image RemovedImage Removed
    Image Removed
    Insert excerpt
    Cut Side Specifications in the Configurations
    Cut Side Specifications in the Configurations
    nameCut Side Configs
    Image Added

    Default Settings