If the current Layer uses a different Blade Cartridge or is a different Mat Thickness than the last layer cut, the user will be prompted to change the Cartridge and/or the Blade Depth.
Info
On the CMC Z1, setting the Blade Depth in the software will automatically set the Blade Depth in the hardware.
The Z1 will automatically adjust the physical Blade Depth of the CMC to this value when you click Continue.
Click Continue to cut.
Image Modified
Turn the Blade Depth knob on the Head to the requested Blade Depth. The software Blade Depth and the hardware Blade Depth value should match.
