Convert Arcs to Splines | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| title | ||||||||||||
|
|
|
See: Arcs Definition
See: Arcs Tool Function
See: Splines Definition
See: Convert Arc to Splines Function
| title | Arc Definition |
|---|
The Arc has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).
The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.
See: Arc Tool in Trace
See: Arc Tool Definition
See: Splines Definition
See: Convert Arc to Splines Function
| Expand | ||
|---|---|---|
| ||
The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software. The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor), Two Separate Middle Points (called Handles) which can be moved to alter the shape, and the Terminating Position (called an Anchor) The Convert Arc to Splines process will convert any Arcs to Splines which are easier to tangify to make cuts smoother. See: Curve Tool Function in Trace |
|
| Insert excerpt | ||||||
|---|---|---|---|---|---|---|
|
Converting Arcs to Splines | ||||||||
|---|---|---|---|---|---|---|---|---|
Expand | | |||||||
| ||||||||
| Expand | ||
|---|---|---|
| ||
The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software. The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor), Two Separate Middle Points (called Handles) which can be moved to alter the shape, and the Terminating Position (called an Anchor) The Convert Arc to Splines process will convert any Arcs to Splines which are easier to tangify to make cuts smoother. See: Curve Tool Function in Trace |
The Arc has been converted to a Spline, or in other words, into a 4-Point Bezier Curve.
| title | Arc Definition |
|---|
The Arc has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).
The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.
See: Arc Tool in Trace
See: Arc Tool Definition
See: Splines Definition
See: Convert Arc to Splines Function
| Expand | ||
|---|---|---|
| ||
The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software. The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor), Two Separate Middle Points (called Handles) which can be moved to alter the shape, and the Terminating Position (called an Anchor) The Convert Arc to Splines process will convert any Arcs to Splines which are easier to tangify to make cuts smoother. See: Curve Tool Function in Trace |
