Versions Compared

Version Old Version 11 New Version 12
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

V-Groove Width for Open V-Groove: Properties Tab

Info

  • Enter the desired VG Width to a value above 0 (Zero).

  • This will be the Width of the Open V-Groove. 

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information: See Width Adjustment in the Configurationsfor information on adjusting the V-Groove if it is cutting too narrow or too wide.

Expand
title
Insert excerpt
Normal Bevel Open V-Groove
Definition
The
Normal Bevel Open V-Groove
involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart. Both the matboard core and the lower layer matboard are visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise: Normal Bevel Drop*.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Normal Bevel Opening.

*The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within the Design Editor.

Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.

Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.

Image RemovedBevelType45NDSelect70800.jpgImage RemovedBevelType45NBSelect70800.jpgImage Removed

See: 45 Degree Normal Bevel Drop Configurations

See: 45 Degree Normal Bevel Opening Configurations

See: 45 Degree Plus Normal Bevel Drop Configurations

See: 45 Degree Plus Normal Bevel Opening Configurations

See: 45 Degree Front Normal Bevel Drop Configurations

See: 45 Degree Front Normal Bevel Opening Configurations

See: 52 Degree Normal Bevel Drop Configurations

See: 52 Degree Normal Bevel Opening Configurations

Image Removed
nameNormal Bevel Open V-Groove
VGrooveWidthLarger070800.pngImage Added