Page Comparison

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Cutting from the Back Configurations

Info
There is a separate bevel type configuration for cutting from the Front and cutting from the Back.

Select the desired bevel type from the Back.
Configurations cut from the Back will only display the bevel type name with no further label; i.e., Normal Bevel.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Insert excerpt

	Cut From Back Configurations Definition
	Cut From Back Configurations Definition
name	Cut From Back Configs

Expand

title	How to Adjust the Configurations

nopanel	true