| Panel |
|---|
| panelIconId | atlassian-plus |
|---|
| panelIcon | :plus: |
|---|
| panelIconText | :plus: |
|---|
| bgColor | #FFFAE6 |
|---|
| | title | 45° The 45° Front Reverse Bevel Drop is created by cutting into the front of the fallout surface with the blade angled at 45°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within the Design Editor.
|
|---|
| Expand |
|---|
|
|  Image Added |
| Excerpt |
|---|
| hidden | true |
|---|
| name | 45 Degree Front Reverse Bevel Drop |
|---|
|
...
|
The 45° Front Reverse Bevel Drop is created by cutting into the front of the fallout surface with the blade angled at 45°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within the Design Editor. Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration
|
...
See: 45 Degree Front Reverse Bevel Drop Configurations
...
| title | How to Adjust the Configurations |
|---|
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
...
| Image Modified |