The Interior Overcut for V-Grooves controls where the Blade Retractsfrom the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove.
The Interior Cut is where the Blade Plunges/Retracts from the Fallout (not the Matboard).
If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Long, Decreasethe Interior Overcut on V-Grooves.
If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Overcut on V-Grooves.
Expand
title
How to Adjust the Configurations
When adjusting Configurations, click the Plus(Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
