A Swoopin is where the corners Curve Inward toward the opening on the insideor /outside cut of the V-Grooveis where the corners Curve Inward toward the opening.
If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.
If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.
Expand
title
How to Adjust the Configurations
When adjusting Configurations, click the Plus(Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
