|  |
| Excerpt | ||||
|---|---|---|---|---|
| ||||
|
...
|
...
|
...
|
...
The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).
...
If the Exterior Overcut on the Outside Cut of the V-Groove is cut Too Short, Increase the Exterior Overcut.
The V-Groove Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.
...
See: V-Groove Exterior Overcut Configurations
...
| title | Exterior Overcut of Creases Definition |
|---|
...
If the Overcut is Too Long, Decrease the Exterior Overcut.
If the Overcut is Too Short, Increase the Exterior Overcut.
The Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.
...
See: Overcut for Creases Configurations
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
|
The Exterior Overcut field is marked with a Red Arrow on the Configuration screen and the Map illustration.
...
See: Exterior Overcut for the Outside Configurations
...
| title | V-Groove Exterior Overcut of V-Grooves Definition |
|---|
...
|
...