Page Comparison

• For Additional Information:

• See Troubleshooting Utility for information on adjusting for a Feather or Bump in an Oval V-Groove.

• See Circle/Oval Rotation Utility to adjust for a Feather or Bump in an Oval V-Groove.Utility: Configurations Screen

• Troubleshooting Utility for the Configurations

A Feather in the Inside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Inside Cut of the Oval V-Groove.

If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

The Oval Rotation for V-Grooves controls for /wiki/spaces/FrameShop8x/pages/1942509697or /wiki/spaces/FrameShop8x/pages/1942510997on an Oval V-Groove.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.