Page Comparison

Vertical Home for V-Grooves: Configurations Screen

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.
If the V-Groove is cut Too Far Up Vertically, Decrease the Vertical Home.
If the V-Groove is cut Too Far Down Vertically, Increase the Vertical Home.

For Additional Information:
See Vertical Home which defines the global Vertical placement of objects cut with the Blade Cartridges.
See Vertical Home on the Troubleshooting Utility to adjust the bladed cartridges.
See Vertical Adjustment/wiki/spaces/FrameShop8x/pages/1942511519for placement adjustment of the non-blade Tools.

Expand

title	Vertical Home for V-Grooves Definition

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the V-Groove is cut Too Far Up Vertically, Decrease the Vertical Home.

If the V-Groove is cut Too Far Down Vertically, Increase the Vertical Home.

Expand

title	How to Adjust the Vertical Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.