changes.mady.by.user dani.simmonds
Saved on Sept 27, 2024
Saved on Sept 30, 2024
Select As Designed from the Outside Cut Options dropdown control to cut the Outside as originally designed on the CMC Z1, Z (9000z), 9000 and 8000+.
This can be helpful when coming from Traceor Nesting where you have already determined how you want the Outside to be cut.
If you have Remnant Trimming on, it will also cut off the scrap edge.
For Additional Information:
See Matboard Properties in the Design Editor to turn on/off the Outside cut.
Select Options Menu > Cut Outside on the Cut Previewto cut the outside of the mat.
See /wiki/spaces/FrameShop8x/pages/1942506497 on the Cut Previewto turn on/off the Outside cut.
See Enable Outside Cutunder Advanced Outside Options on the Cut Previewto toggle on/off the Outside cut.
See Cut Outside Using 90 Degree Tool under Set Advanced Optionson the Cut Preview.
See Remnant Trimming in the Set Advanced Options section on the Cut Preview.
Default Settings: As Designed Cut Mode: Cutting Default Setting
Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.
See: Remnant Trimming Function
