Page Comparison

For Additional Information:

See Matboard Properties in the Design to turn on/off the Outside cut.

Select Options Menu > Cut Outside on the Cut Previewto cut the outside of the mat.

See /wiki/spaces/FrameShop8x/pages/1942506497 on the Cut Previewto turn on/off the Outside cut.

See Enable Outside Cutunder Advanced Outside Options on the Cut Previewto toggle on/off the Outside cut.

See Cut Outside Using 90 Degree Tool under Set Advanced Optionson the Cut Preview.

See Cut Mode in the Set Advanced Options section on the Cut Preview.

See Shared Edge for the Cut Mode in the Set Advanced Options section on the Cut Preview.

See Full for the Cut Mode in the Set Advanced Options section on the Cut Preview.

See As Designed for the Cut Mode in the Set Advanced Options section on the Cut Preview.

See Remnant Trimming in the Set Advanced Options section on the Cut Preview.

Default Settings:

See Admin > Editor for the default settings for Cutting Cut the Outside.

See Admin > Cutting for the default settings for the Advanced Options.

See Admin > Cutting for the default settings for the Cut Mode.

See Admin > Cutting for the default settings for 90 Degree Outside.

See Admin > Cutting for the default settings for Tiling.

See Admin > Cutting for the default size for the Spacing between designs.: Editor Default Setting

Advanced Outside Settings: Cutting Default Setting

Cut Mode: Cutting Default Setting

90 Degree Outside: Cutting Default Setting