Versions Compared

Old Version 18

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 19

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Change the Cut Order: Trace

Info

  • Only objects matching the Bevel/Cartridge Type selection will be displayed. 

  • The other Bevel/Cartridge Types of the design on the screen will be grayed out.

Expand
titleBevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Expand
titleCartridge Definition

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

  • Click on the specific object you want to edit. 

Info

  • Use the Order Cuts tab to change the Cut Order of a design. 

    • You may want to do this if you are having problems with fallouts sliding behind the mat you are cutting. 

    • Changing Cut Order and Changing Start Cut Pointsmay resolve some of these issues.

Expand
titleFallout Definition

The Fallout is the part of the mat that is removed when a design is cut.

Typically, the Falloutis discarded, or saved for another project if large enough.

Sometimes the Falloutis considered as part of the design, such as the Dropouts on the inner portions of LetterMat letters.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Through Nesting, another design may be cut within the fallout.

See: Drops Definition

CutOrder70800.png

  • Click on the specific object you want to edit. 

Info

  • Click on the desired Cut Order Direction button. 

    • Cut Earlier will change the selected object to cut earlier in the cut sequence.

    • Cut Later will change the selected object to cut later in the cut sequence.

  • The object will move Up/Down in the Cut Order.

  • If we click the button again, it will move Up/Down once more in the Cut Order.

Info

  • The object has moved up once more in the Cut Order.

...