Versions Compared

Version Old Version 40 New Version 41
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
If the Non-Blade Tool line is applied Too Far Up Vertically, Decreasethe Vertical Adjustment.

  • For Additional Information:

  • See Vertical Adjustment/wiki/spaces/FrameShop8x/pages/1942511519for placement adjustment of the non-blade Tools.

    • See Vertical Home which defines the global placement of objects cut with the Blade Cartridges.

  • See Vertical Home on the Troubleshooting Utility to adjust the bladed cartridges.

    • Vertical Non-Blade Cartridges General DefinitionThe Vertical Adjustment defines the global Vertical placement of objects applied with the Tool .When adjusting Configurations, click the Plus (Increase) or Minus (

    • If the Non-Blade Tool line is applied Too Far Up Vertically,

    Decrease

    • Decrease

    ) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Tool Line Too Far Up Vertically

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6

    Vertical

    Expand
    title

    Adjustment for

    Non-Blade

    Cartridges

    the Vertical Adjustment.

    If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

    Image RemovedImage Removed
    Expand
    titleHow to Adjust the Vertical Adjustment
    Image RemovedImage Removed

    Tool Line Too Far Down Vertically

    If the Non-Blade Tool line is applied Too Far Down Vertically, Increase
    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6
    Expand
    titleVertical Adjustment for Non-Blade Cartridges General Definition

    The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

    If the Non-Blade Tool line is applied Too Far Up Vertically, Decreasethe Vertical Adjustment.

    If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

    Image ModifiedImage Modified
    Expand
    titleHow to Adjust the Vertical Adjustment

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    		Image ModifiedImage Modified