Page Comparison

• The Tangification Highlight function will display the specific angle of degrees between the segments where they connect.

• This is extremely useful when Tangifying the arc segment connections to provide a smoother cut between the arcs.

• Note that this is in regards to any series of arcs creating a curve, not where two arcs come together to create an obvious corner/point in the design.

• For Additional Information:

• See Tangify Tool for information on Tangifying Circuits in Trace.

• See Edit>Tangify All Circuits for information on Tangifying All Circuits in Trace.

• See Tangification Highlight for information on the Tangification Highlight Tool.

• Default Settings: See Admin > Cutting for the default setting for the Tangent Threshold.

The Tangify function will smooth the connection between the Selected Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. 

The Tangify All Circuits will smooth the connection between All of the ArcCircuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. 

See: Tangify Function

See: Tangify All Circuits Function

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

• For Additional Information: See Options > Show Control Points to turn on displaying the Control Points of each segment.

Control Points are the dots in the corners of a selected object which can be used to Edit it.

Control Points in Trace are displayed as colored Dots on the Segments that make up the Object. Beginning/End Points are Blue and Center Points are Green. These can be toggled on/off in the Options menu.

Moving these Control Points will change the shape of the element being moved.

Control Points on Bounding Rectangle are displayed as darker dots on the corners of the Bounding Rectangle of the selected Object that can be used to edit the object.

See: Bounding Rectangle Definition

• For Additional Information: See Tangification Highlight for information on the Tangification Highlight Tool.

• Default Settings: See Admin > Cutting for the default setting for the Tangent Threshold.